Fusebox F2017D80 Dual RCD 17 Way. 18th Edition Dual RCD 17 Useable Way Consumer Unit
BS EN 61439-3 IP20XC
1mm ELECTRO GALVANISED STEEL (ZINC) RAL9001 SMOOTH POWDER COATED FINISH T2 SURGE PROTECTION CAN BE RETRO FITTED TAIL CLAMP COMPATIBLE(ACCF) EARTH AND NEUTRAL TERMINAL BARS AT THE TOP REMOVEABLE AND RAISED DIN RAIL ROUND EASY TO REMOVE KNOCKOUTS EXTRA HEIGHT FOR RCBOS CAPTIVE SCREWS ON FRONT COVER CIRCUIT IDENTIFICATION LABELS
Fusebox T2 Surge Protection Device Single Pole with 32A MCB
FuseBox Type 2 surge protection device (or SPD for short) T2 for TN Systems. Compact 1 modular width version that comes with a 32A MCB and connecting cable. Suitable for retrofitting into existing consumer units to provide surge protection.
1 Module 35mm DIN Rail Mount
Supplied with a 32A B Type MCB that protects the SPD
Terminal Capacity Maximum: 16mm2
SPD (Surge Protection Device)
Installation instructions & device sticker included
Surge protection device must be installed upstream of an RCD within the installation.
Garo GLBDC-T274WOPME Domestic Wall Mounted Charger GLB (NON OLEV)
Socket Type 2 Selectable KW Between 3.7KW & 7.4KW
DC Leakage Control Built In
For charging at home or the workplace, a Wall Mounted charger is the most common option. With Garo’s GLB Charger, a hybrid EV can be fully charged in around 3 hours, and a pure electric EV in around 6 hours.
A unique Dynamic Load Balancing function ensures that the installation’s main protective device is safeguarded by the EV charging station. As the power demands of your electricity system alter the charger will respond accordingly, telling the EV to reduce or stop charging when power usage is high in your system, and to increase when your overall electricity have slowed reduced. The motorised interlock prevents the vehicle owner’s lead from a locked in position. In the event of a power cut, the inbuilt power reserve will also remove the interlock, allowing the user to disconnect and drive. An input for low tariff or night rate charging allows the user to plug their car in at any time, but charging will only take place at times that are specified by the user, such as low tariff / night rates.
Wifi allows the user to monitor the charger from their computer/smart phone. The user can set up multiple parameters for charging, billing etc. Software updates are automatically distributed. RFID access control makes the EV charger more secure. Any user must have an RFID tag to activate the charger. This feature can be incorporated with the billing system. Cloud Based Billing Solutions with the option to install up to 32 x chargers under the control of one master charger.
The Lighthouse Rechargeable Inspection Light features an SMD LEDwork light, providing a powerful 300 lumen output floodlight, along with a bright 100 lumenspotlight function. The inspection light features a powerful rechargeable 3.7V Li-ion 2200mAh battery that provides a run time of between 3 to 9 hours, depending on the function selected.
The unique swivelling base and magnetic back, allow the torch to be set at a convenient angle for the job-at-hand and also attached to metal surfaces. In addition, it has 2 convenient folding hang hooks, making this torch ideal for use in most situations.
Supplied complete with mains charger and a 12V USB car charger and USB lead.
Niglon LED 120W Intelligent Dimmer Module LEDDIM120
The Niglon intelligent dimmer is a programmable module, to enable improved performance, when dimming modern lighting loads. This dimmer is suitable for most LED lighting and can also be used for dimming Mains Halogen, GLS and CFL.
Please Note: Use only on a supply voltage of 200-250V AC
3 Mode settings for improved compatibility
Programmable for both trailing edge and leading edge
Programmable minimum brightness level
Compatible with LED, Halogen, Incandescent, CFL & GLS
In-built overload protection
3 Year Manufacturers Warranty
Compatible with most dimmer plates
Back Box size is dependent on configuration and setup, a 47mm Back Box is recommended
Maximum Loads - Lighting Type: Push on/off Dimmer
GLS: 200W Mains Halogen: 150W Eco Halogen: 150W Dimmable LED - 1 to 10 LEDs (max 120W) CFL: 120W
Disclaimer Due to the technical nature of LED dimming, we advise you contact us if you're unsure on your LED dimming requirements. LED dimming can be a headache if purchased incorrectly and there are many factors which can effect the nature of dimming LED.
Always check with the manufacture of the LED lamps or LED fittings you want to dim as this dimmer module may not be suitable.